How to install the pedals?

The pedals are equipped with a special adjustment system. When installing them, make sure that you have selected the pedal corresponding to the correct crank; on the right crank, the right pedal will be marked with the letter R (Right), and on the left crank, the left pedal will be marked with the letter L (Left). 

Verify that the holes are clear and, if possible, grease them lightly. Always screw the pedals with the crank in the direction of travel. Be careful not to screw in the pedals too tightly, as this could damage the threads and make them unusable. 

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.