30023EN - How to install the pedals 🔧

Tools

Use a 15mm open-end wrench to screw the pedals into the crank arms.

Next steps

When installing them, make sure you have selected the pedal that corresponds to its crank arm:

  • Right crank, the right pedal, marked with the letter R (Right).
  • Left crank, the left pedal marked with the letter L (Left).

Check that the holes are free of obstructions, and if possible, add a little grease.

Screw the pedals into the crank in the direction of pedaling. Try not to over-tighten, as it could damage the threads and render them unusable.

Use the15mm open-end wrench to screw the pedals into the crank arms.


Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.